Sinterit Lisa X: Fast, Compact SLS 3D Printer for Production

The Sinterit Lisa X is the fastest compact SLS 3D printer in the Sinterit range. Sinterit positions the Lisa X as the third generation of its compact SLS platform, built to deliver industrial SLS 3D printing speed inside a benchtop footprint. The machine prints PA12 at 10 to 14 mm per hour, up to ten times faster than the older Lisa PRO. Build volume measures 130 x 170 x 330 mm, large enough to complete a full print bed in 30 hours. A 30W diode laser and a galvanometer scanner drive the speed gain. Open material control and 32 adjustable parameters keep this fast SLS 3D printer useful for research, prototyping, and short-run production teams.

Lisa X print speed and build volume in numbers

The Sinterit Lisa X prints at 10 to 14 mm per hour using PA12 powder. A full print bed completes in 30 hours, and most jobs finish in under 24 hours. The build volume measures 130 x 170 x 330 mm, or 5.1 x 7.1 x 13.0 inches.

Mass production gains come into focus on repeat parts. Sinterit reports a batch of electrical connectors taking 103 hours on the original Lisa and 205 hours on the Lisa PRO. The same batch prints in 28 hours on the new machine. A single Sinterit Lisa X run produces 270 sets, up from 56 on the Lisa and 112 on the Lisa PRO.

The Sinterit team puts the case in plain terms.

"We are presenting Lisa X. Third generation of compact SLS 3D printer made to speed up your innovation. We are still focused on delivering the whole SLS 3D printing solution, to make additive manufacturing useful and meaningful. With Lisa X this experience will be even better, faster prints and bigger print volume answers the most common demands of the market," says Maxime Polesello, Sinterit's CEO.

What makes the Lisa X ten times faster than Lisa PRO

The speed jump comes from two hardware changes. The Lisa PRO used H-bot kinematics, moving the laser head across the bed on motors. The new machine replaces this with a galvanometer scanner. The print head stays still and a mirror system steers the beam. The laser itself is a 30W diode unit, six times stronger than the laser inside the Lisa PRO. Together these let the Lisa X sinter the bed at industrial speed without sacrificing detail.

A second time-saver sits inside the chamber. An airblade cleans the laser glass automatically during printing. Operators only need to wipe the glass after three cycles, not after every print. Less downtime between jobs converts directly into more billable print time on the calendar.

PA12, open material control, and 32 parameter access

The Lisa X prints in the full Sinterit thermoplastic powder library. PA-12 Industrial is the flagship engineering nylon for tough, isotropic end-use parts. PA-12 Smooth produces a cleaner surface finish on visible components. PA-11 CF carries carbon-fibre reinforcement for aluminium-replacement strength. PA-11 Onyx and PA-11 ESD cover impact-resistant and electrostatic-dissipative applications. PA-11.5 sits between the PA-11 and PA-12 families for balanced toughness. Flexa Performance TPU prints flexible rubber-like parts, and Sinterit Polypropylene opens up chemical-resistant production work. The compact SLS 3D printer is rated for the full library because of its open architecture.

Open material control matters for research and education buyers. Operators modify 32 separate parameters inside Sinterit Studio, including printing temperature, warmup and cooldown cycles, laser power, laser movement, and model scale. This level of control is rare in compact SLS systems. Labs run third-party powders without breaking the workflow.

Sinterit's R&D team frames the lineup choice this way.

"All of our compact SLS 3D printers are in production, as they cover different needs. Lisa, our first model is the most compact and most affordable SLS 3D printer, Lisa PRO guarantees a wide range of materials and an open environment. Lisa X adds fast printing time and large working area," says Michal Grzymala-Moszczynski, head of R&D and co-founder of Sinterit.

Where the Lisa X fits in Australian production and prototyping workflows

For Australian teams, this fast SLS 3D printer solves a familiar problem. Motorsport, aerospace, defence, and university research labs need short-run SLS parts without committing to a 200-square-metre print room. The Sinterit Lisa X plugs into single-phase power, sits on a benchtop, and prints production-ready PA12 parts overnight.

Swedish aerospace startup Jetson uses the same machine to produce flight-ready brackets, sensor housings, and assembly jigs for the Jetson One single-seat eVTOL aircraft. We have seen Australian engineering teams adopt the same approach for drone airframes, motorsport jigs, and medical device prototypes.

If you are comparing compact SLS systems, see our Suzy vs Lisa X comparison for the full breakdown against the newer Sinterit Suzy. For a primer on the technology behind the print, see our explainer on what is selective laser sintering and how it works, and the practical guide on how to manufacture with SLS printing.

Frequently asked questions

How fast is the Sinterit Lisa X compared to Lisa PRO?
The Lisa X prints up to ten times faster than the Lisa PRO. A full print bed completes in 30 hours, and most production jobs finish in under 24 hours.

What is the Sinterit Lisa X build volume?
The Lisa X has a build volume of 130 x 170 x 330 mm, or 5.1 x 7.1 x 13.0 inches. The chamber is large enough to print parts up to 40 cm long when placed diagonally.

What materials can be used by the Sinterit Lisa X?
The Lisa X runs the full Sinterit thermoplastic powder library: PA-12 Industrial, PA-12 Smooth, PA-11 CF, PA-11 Onyx, PA-11 ESD, PA-11.5, Flexa Performance TPU, and Sinterit Polypropylene. The open material architecture also supports third-party powder testing under the 32-parameter control system.

Is the Sinterit Lisa X suitable for production parts?
Yes. The Sinterit Lisa X is rated for end-use production at short-run volumes. SLS parts in PA12 are tough, isotropic, and dimensionally stable enough for jigs, fixtures, sensor housings, and flight-line components.

How does the Sinterit Lisa X compare with the Sinterit Suzy?
The Lisa X is the established compact SLS workhorse with a production track record at companies including Jetson. The newer Sinterit Suzy targets larger build envelopes and faster cycles for production teams. See our Suzy vs Lisa X comparison for the full breakdown.

---

Want to view our range of Sinterit SLS 3D printers and powders? Click here.

• Share on:
• WhatsApp
• Deel
• X
• Pin it
• Messenger
• Email

---

Tags

3D Printer Compact SLS Industrial 3D Printer Lisa X PA11 PA12 Sinterit SLS 3D Printer SLS 3D printing