News
-
Suzy vs Lisa X: Which SLS 3D Printer is Right for Your Research?
If you are looking at SLS 3D printing for your lab, workshop, or production floor, Sinterit makes two printers worth comparing: the Suzy and the...
-
What is SLS 3D Printing? A Complete Guide for Australian Manufacturers
If your team is weighing up which 3D printing technology fits production parts, prototypes or low-volume runs, this guide explains what SLS 3D printing is,...
-
Sinterit Suzy: The New Compact SLS 3D Printer for Production
Sinterit has launched Suzy, the fourth generation in its compact SLS line. The new Sinterit Suzy SLS 3D printer runs on PA-12 Industrial, prints 35%...
-
SLS 3D Printer Installation: What to Prepare Before Delivery
What do you need to prepare for an SLS 3D printer installation? At minimum, a 9 m² room with 2.4 m ceiling height, two dedicated...
-
Nitrogen SLS 3D Printing: A Sinterit Lisa X Setup Guide
Do you need nitrogen for SLS 3D printing on the Sinterit Lisa X? For PA11 powders, yes; for PA-12, no. This guide walks through how...
-
New RapidRinse Water Soluble Support Material
Experience easy 3D Industrial Printing with RapidRinse™ and ABS-R, two new 3D Printing materials for 2022 by MakerBot.
