News
-
Sinterit Suzy: The New Compact SLS 3D Printer for Production
Sinterit has launched Suzy, the fourth generation in its compact SLS line. The new Sinterit Suzy SLS 3D printer runs on PA-12 Industrial, prints 35%...
-
The 5 Stages of Your 3D Printing Journey: From Curiosity to Mastery
Every 3D printing journey follows a predictable path. Here are the five stages most users move through, and what to expect at each one.
-
SLS 3D Printer Installation: What to Prepare Before Delivery
What do you need to prepare for an SLS 3D printer installation? At minimum, a 9 m² room with 2.4 m ceiling height, two dedicated...
-
Buy UltiMaker Australia: A Schools and Business Buyer's Guide
Where do Australian schools, universities, and businesses buy UltiMaker 3D printers? Buy UltiMaker Australia through Australian 3D Printers, the authorised UltiMaker reseller for the Australian...
-
How to Get More Out of UltiMaker Digital Factory (Without Upgrading)
Managing 3D printing in a school is harder than it looks. Students submit files from different devices, queues pile up across multiple printers, and keeping...
-
Nitrogen SLS 3D Printing: A Sinterit Lisa X Setup Guide
Do you need nitrogen for SLS 3D printing on the Sinterit Lisa X? For PA11 powders, yes; for PA-12, no. This guide walks through how...
-
How 3D Printers Can Transform Your Business
Learn how 3D printing is revolutionising the business world. Across industries, demand for 3D printers in Australia continue to grow as organisations look for faster,...
-
3D Printing Trends: Inside MakerBot's Inaugural Report
MakerBot's first trend report mapped how businesses invest in 3D printing. See the key 3D printing trends, from 74% investment intent to the move from...
-
MakerBot Sketch Large: More Build Volume for the Classroom
In 2022, MakerBot introduced the MakerBot Sketch Large, expanding the Sketch platform with a larger build volume designed for education. The printer allows classrooms to...
-
MakerBot Sketch Sprint: The Classroom 3D Printer Built for Speed and Safety
In 2024, MakerBot has introduced the MakerBot Sketch Sprint, a new 3D printing solution designed specifically for education. With significantly faster print speeds, enhanced safety...
-
UltiMaker Cura 5.11 Beta: Painting Tools and New Profiles
UltiMaker has released the Cura 5.11 beta. The update brings paint-on seam and multi-material tools, expanded print core support for the UltiMaker S6 and S8,...
-
MakerBot RapidRinse: Water Soluble Support Material
MakerBot launched RapidRinse in 2022, a tap water soluble support material engineered for ABS 3D printing on the Method X range. The material dissolves in...
